Nos encontraras en Carroceria , chapa y pintura en ALCALA DE HENARES, POLIGONO LA GARENA( 28806) Calle Argentina 12 Nave 6
Taller
calle argentina 12 nave 6 alcala de henares
This onboard remote control kit gives you the option of opening your OEM (or Capristo) exhaust valves at the touch of a button.
The reason to have exhaust back pressure control is to obtain a better engine torque band and to maintain drive-ability in a wide range of conditions. Today’s high performance engines prefer a free flowing exhaust at wide throttle openings and high rpm. At smaller throttle openings and low rpm encountered in traffic, a slight increase in exhaust back pressure, results in better low end torque and a more user friendly engine.
This pressure is controlled by one or a set of butterfly valves in the exhaust system. These valves are in turn controlled by the engine ecu which would open and close the valves according to a preset set of rules. When using the vehicle on a track or in a sporty environment where it is desirable to keep the valves in an open position, a push of a button on the remote controller makes this possible.
This controller interfaces perfectly with your exhaust valve equipped CAPRISTO or OEM exhaust for select models. The electrical connections from your original wiring harness, powers the controller. This essentially makes fitment of this controller as easy as ‘plug and play’.
Three control modes are available (using key fob buttons 1, 2, and 4)
The remote key fob supplied with the controller is stylish and is pre-programmed. An on board self learning function allows you to program more key fobs should the need arise. An added safety feature is a fail safe condition which allows the exhaust valves to go to the open position in case of electrical failure. This prevents engine and or header damage from excessive heat build up.
Porque nos debes elegir? Llevamos muchos años personalizando coches de alta gama, hemos realizado proyectos incluso sobre coches a estrenar. Sabemos como desmontar y montar un coche en condiciones y dejandolo como venia de origen, tenemos muchisima experiencia. No subcontratamos el trabajo con lo cual todo queda controlado internamente. Tenemos grandes carroceros, los mejores pintores, y eso hace que ese trabajo en grupo, lleve el equilibrio hacia un resultado optimo de reforma.
Hacemos piezas en carbono, fabricamos piezas nuevas, si no ves lo que te gusta en el mercado se puede hacer a medida incluso. Y lo mas importante en un reforma, es que sabemos como ajustar las piezas correctamente. Si tu pieza no ajusta muy bien , la reconstruimos, recuerda que somos fabricantes y no solo montadores, con lo cual siempre hay soluciones. Atarius Concept no tiene ninguna Limitacion. Nunca te diremos que no se puede hacer.
Experto Carroceria
RODRIGO VALENZUELA
Estamos aqui para complacer todos tus sueños, trabajaremos en lograr que tus metas y objetivos se hagan realidad.
Nuestra experiencia en el sector de mas de 10 años, avalan nuestros resultados. Un proyecto de reforma de un vehiculo requiere de un equipo con esa experiencia y estamos aqui para brindarte nuestra ayuda y saber hacer para que lo consigas.
Nos encontraras en Carroceria , chapa y pintura en ALCALA DE HENARES, POLIGONO LA GARENA( 28806) Calle Argentina 12 Nave 6